Constructive interference vs destructive interference is a more superficial comparison to understand the wave interaction.
CONSTRUCTIVE INTERFERENCE | DESTRUCTIVE INTERFERENCE |
Two waves sum up each other | Two waves negate each other |
Crest and crest meet one another | Crest and trough meet one another |
The resultant wave has a larger amplitude | The resultant wave has a smaller amplitude |
Now we shall see what factors aid in determining the difference between constructive interference and destructive interference.
- Constructive interference vs destructive interference considering Amplitude
- Constructive interference vs destructive interference considering Wave’s
- Constructive interference vs destructive interference considering Frequency
We must take note of the type of wave we must consider before they interfere with one another. Basically, when two waves interfere with each other, that process is termed to be interference.
When one wave interferes with another wave and results in a larger wavelength, it is termed constructive interference, and when two waves interfere with each other, resulting in a smaller wavelength, then it is termed destructive interference.
Generally, when in constructive interference, the two waves meeting each other with the same amplitude will result in the wave having an amplitude that is larger than the individual wave. This is mainly seen in speakers playing the same music, and we hear the same music but very much louder.
In destructive interference, the two waves which go hand in hand with each other will always have a resultant displaced wave having amplitude that is small. The crest of one wave meeting the trough of another cordially gives way for destructive interference.
We can see the destructive interference example in daily life. The destructive interference concept is applied in the technology level, that is, headphones being a noise canceler. The amplitude will be much smaller compared to that of constructive interference.
Constructive interference vs destructive interference considering Amplitude
The constructive interference is termed as such because the two waves meeting one another will have their respective amplitudes. When they encounter each other, the amplitudes of the two waves will merge and result in one single wave of equal amplitude.
The wave appearing in the same medium being a resultant has an amplitude that is way much higher. So, in this case, the medium in which the constructive interference occurs will have an upward displacement.
The resultant upward displacement of the resultant wave is larger than the individual displacement of the two waves interfering. The constructive interference occurs along with medium and in the same direction as the originating waves.
Let us take an example where the constructive interference is influenced by the amplitude. Consider two pulse waves travelling in the same medium also in the same direction. They will have particular amplitude individually.
In destructive interference, the waves having a 180⁰ phase will cancel out each other if the two are positive and negative. The individual amplitude value is larger than the final wave of amplitude that is way much smaller.
The waves interfering have nodes which are called the ends of the wave. The constructive and destructive have the nodes that match at the exact location, which is the resultant wave of the interference process.
Constructive interference vs destructive interference considering Wave’s
Wave patterns that appear in general are due to the consequence of interference of the two waves colliding with each other.
When the waves interfere, the resultant wave pattern appears in the same direction since the amplitude has the more significant measure. Here the crest and crest meet each other. But in destructive interference, the wave pattern appears opposite to each other.
The resultant wave pattern in a destructive interference will always have an opposite where the crest of one wave will meet the rough of the other wave. Also, the amplitude of the displaced wave will be smaller than the individual waves that interfere with each other.
Let us see how wave patterns are formed when the interference process takes place in a pool. When we stand inside the pool with both hands stretched and move back and forth, there will arise a wave pattern.
The wave pattern is simply the wavefronts of the primary waves when they undergo interference. When both hands have been stroked back and forth, it will form a wave pattern. The troughs in the wave pattern will cancel out each other.
The cancelling of the troughs of the wave is termed destructive interference. The area of the wave pattern which keeps on increasing is a sign of the addition of the waves. This is termed constructive interference.
These wave patterns are essential not only in water sound but mainly in light too. In light, when the light waves hit a surface that has a gap in it, the diffraction pattern is obtained. When one single beam enters the hole, it will come out as a whole set of waves.
Constructive interference vs destructive interference considering Frequency
Generally, constructive interference occurs when the crest and crest of two interfering waves meet each other. Due to this, the amplitudes also will add up and form a wave pattern of the same individual waves.
When the Frequency of the waves appear to be the same, then the resultant wave will be the same and appear in the same medium. When we consider the sound waves, the sound will be heard more in constructive interference.
When a number of cycles happen at a particular point given is certainly termed to be the frequency and it also related to amplitude of the resultant.
Hence when constructive interference vs destructive interference occurs, it will have so many factors that will influence the secondary wave pattern in general.
Frequently Asked Questions
What is the interference of light?
When the two light waves interfere with each other is termed light interference.
The disturbance of light due to one deformed wave will lead to the interaction of the two waves. Interference of light occurs if the light waves have the same amplitude, Frequency and also should be coherent.
What is the destructive interference example?
Noise-cancelling headphones are one of the prominent examples of destructive interference.
When the headphone has a microphone attachment, it will gradually pick up the Frequency of the waves of the incoming. So the amplitude will be less when the resultant wave is displaced in opposite to one another.
What is a good interference example?
One good example of sound wave interference is musical instruments.
For instance, let us consider guitar. When two guitars are tuned in phase, they will sound the same when played. But if the tuning is different, we get to hear different notes while hearing. When speakers play a sound, if they play with the same amplitude, then we call it constructive interference.
Also Read:
- How do mirages form
- How to find coefficient of friction on an inclined plane
- Classical conditioning examples
- Conduction examples
- Do a hammer drill spin
- Properties of reflection
- Numerical problems on gravitation class 9
- Constructive and destructive interference
- How total internal reflection occurs
- Why is the sky blue
Hi…I am Keerthana Srikumar, currently pursuing Ph.D. in Physics and my area of specialization is nano-science. I completed my Bachelor’s and Master’s from Stella Maris College and Loyola College respectively. I have a keen interest in exploring my research skills and also have the ability to explain Physics topics in a simpler manner. Apart from academics I love to spend my time in music and reading books.
Let’s connect through LinkedIn